How Much Cement and Sand For Plaster?
Plastering a wall looks simple. But if you buy less cement, work stops in the middle. If you buy more, you waste money. That is why most homeowners in the US ask one question before starting: how much cement and sand for plaster?
The answer depends on 3 things: your wall area, plaster thickness, and cement to sand ratio. Our free cement and sand calculator above does this math in seconds. You just put length, height, thickness and ratio, and it tells you bags, sand and water.
What Is Plaster?
Plaster is a thin layer of cement, sand and water on a brick or concrete wall. It makes the wall smooth, strong and ready for paint. Without plaster, your wall will stay rough and paint will not stick properly.
There are 2 types of plaster: inner plaster and outer plaster. Inner plaster is usually 12mm (1/2 inch) thick. Outer plaster is usually 18mm (3/4 inch) thick because outside wall faces rain and sun.
Cement To Sand Ratio For Plaster
Ratio is the most important part. For normal home walls, builders use 1:6 ratio. It means 1 part cement and 6 parts sand. This is strong enough and cheap.
For bathroom, kitchen and outer walls where water touches, use 1:4 ratio. It is stronger. It costs more because you need more cement. For ceiling, many builders use 1:4 also.
Never use 1:8 or weaker for plaster. It will crack after few months.
How To Calculate Cement For Plaster? Formula
The formula is simple if you follow steps:
Step 1: Wall Area = Length x Height
Step 2: Wet Volume = Area x Thickness (in feet)
Step 3: Dry Volume = Wet Volume x 1.33. We multiply by 1.33 because sand has air gaps.
Step 4: Cement Volume = Dry Volume x 1 / (1 + Ratio)
Step 5: Sand Volume = Dry Volume x Ratio / (1 + Ratio)
Step 6: Bags = Cement Volume / 1.25. One 50kg bag = 1.25 cubic feet.
Always add 10% extra for wastage. Some plaster falls on floor, some sticks in bucket.
Example: 10ft x 10ft Wall
Let's take a 10ft long and 10ft high wall, 3/4 inch thick, 1:6 ratio.
Area = 100 sq ft. Wet volume = 100 x 0.0625 = 6.25 cu ft. Dry volume = 8.31 cu ft. Cement = 8.31 x 1/7 = 1.18 cu ft = 0.95 bag. Sand = 7.12 cu ft. With 10% wastage = 1.05 bags cement and 7.83 cu ft sand. So you need to buy 2 bags cement because shop does not sell half bag.
How Much Sand For 1 Bag Cement?
For 1:6 ratio, 1 bag cement needs about 6.5 to 7 cubic feet sand. For 1:4 ratio, 1 bag needs about 4.5 cubic feet sand. This is why ratio changes your cost a lot.
How Much Water For Plaster?
Use about 20 liters water for 1 bag cement. Do not add too much water. Extra water makes plaster weak and cracks. Plaster should be like thick paste, not watery.
Common Mistakes
1. Not cleaning wall before plaster. Dust makes plaster fall off.
2. Not wetting wall. Dry brick sucks water from plaster.
3. Making plaster too thick in one coat. Do in 2 coats if wall is very rough.
4. Using dirty sand with clay. Always use clean river sand.
Related Calculators
If you are building a new wall, first use our "Brick Calculator" to find how many bricks you need. Then use our "Concrete Calculator" for slab and footing. Then this cement calculator for plaster. All 3 together give you full building cost.
FAQ
How many bags of cement for 100 sq ft plaster? For 3/4 inch thick, 1:6 ratio, you need about 1.1 bags + wastage = 2 bags. Always buy 2 bags.
What is the best ratio for plaster? 1:6 for inner wall, 1:4 for outer wall and bathroom.
How thick should plaster be? 12mm for inner wall, 18mm for outer wall.
Can I plaster without sand? No. Sand gives strength and stops cracking. Only cement will crack.
0 Comments